Dymax Curing Systems enhance 3D printing

Dymax Curing System Configurations Ideal for Post-Cure Processes or Rework

2000-ECE Flood Lamp with Zip Shutter Light Shield

Dymax Corporation introduced a new application for its UV light-curing spot and flood-lamp systems that enhance configurations for 3D post-curing applications or help rework the model. After a 3D model is built, it may be necessary to supply additional curing energy to the part to ensure that optimized material properties are achieved.

BlueWave 200 3.0 Single Lightguide

Dymax UV light-curing flood-lamp systems are designed for area curing or for curing multiple assemblies at once. These flood-lamp models use a powerful UV light-curing lamp (up to 225 mW/cm²) for fast curing over a 12,7 cm x 12,7 cm (5″ x 5″) area. For rework or repair, such as curing drain-hole fills, assembling larger assemblies, or repairing cracked or broken models, the company’s BlueWave 200 3.0 spot-lamp system is the ideal solution. This unit is a high-intensity lamp that emits energy in the UVA and visible portion of the spectrum (300-450 nm) and is ideally suited for either manual or automated processes. It contains an integral shutter which can be actuated by a foot pedal or PLC and a universal power input that allows operation globally and provides consistent performance at any voltage.

www.dymax.com

0

Start typing and press Enter to search