Reconfigurable Probe Station

IMG_1141D-COAX, Inc. has introduced a reconfigurable probe station (Model W4.0 x L6.5)
This mini probe station is meant for the busy design engineer or technician. It’s used to test a chip or small circuit board for the project that cannot wait for the local lab probe station availability. The probe station has small footprint (X = 22 in, Y = 9 in, Z = 8 inch) and can be used at the desk or a lab. It’s easy to transport weighing only 9 pounds.

The probe station is fully manual with the following features: 4.0 inch x 6.5 inch test plate with vacuum holes; wide probe holder plates on each positioner with multiple holes for probe mounting; both positioners can slide back and forth in the X and Y directions and can be moved toward the DUT at the angle; the height positioning is accomplished via digital micrometers; and each positioner can be locked independently. Magnetic plates attach to the normal probe mounting holes to allow additional magnetic XYZ positioners with fine adjustment; probe arms are adjustable in the X, Y, Z, and theta.

This probe station is compatible with all standard wafer probes and many DC needle set-ups. See the video at our website. All D-COAX products are made in the USA.
D-COAX, Inc. 401 East First Street, PO Box 999, Newberg, Or 97132; (503) 922-2436, e-mail:, website:


Start typing and press Enter to search