IPTE to exhibit at electronica 2018

IPTE, one of the world’s leading suppliers of automated production equipment for the electronics and mechanics industry, will exhibit with an own booth (hall A3, number 565) on the upcoming electronica 2018 (November 13th to 16th) in Munich, Germany. IPTE’s main focus at the exhibition will be „smarTEST Solution“. Due to that, efficient equipment will be shown: Fast test and board handling, 3D Vision check to verify pins in a connector and a battery charger/discharger for e-automotive.

Furthermore, IPTE is present at the booth of elowerk (hall A3, number 149). In this showcase a IPTE 19 inch Multifunctional Test Handler (MFT) works in combination with an the circuit tester Z1 from elowerk, a speed optimized solution for test handling and in circuit test.

At the IPTE booth:
Two IPTE Easy Test Handlers (ETH) with bypass transport in combination with multi magazine loader/unloader MLL 3P and MLU 3P (one of each) will show fast test and board handling. Thanks to the bypass transport of the ETH, conveying can be done while testing the boards. Due to this, the cycle time is optimized. In addition, this solu-tion shows how versatile and fast the IPTE components can be used.

The 3D Vision check is used to check pins in connectors to see if all pins are straight, inline and have the right length.
E-mobility is gaining importance. This means also the need to charge and discharge batteries. IPTE will show an innovative contacting unit for a specific test system at electronica in Munich.

www.ipte.com

0

Start typing and press Enter to search