Learn more about Ersa’s reflow, selective solder & rework systems at the SMTA Dallas & Houston Expos

Kurtz Ersa North America, a supplier of electronics production equipment, today announced plans to exhibit at the SMTA Dallas and Houston Expo & Tech Forums. The SMTA Dallas Expo is scheduled to take place Tuesday, April 10, 2018 at the Plano Centre in Plano, TX. The Houston Expo & Tech Forum will be held Thursday, April 12, 2018 at the Bayou City Event Center in Houston, TX. The Ersa team will highlight its advanced reflow, selective solder and rework equipment, including its VERSAPRINT 2 Ultra stencil printer, Ersa Hotflow 3/20, Smartflow 2020 and HR 550.

The VERSAPRINT 2 Ultra is the first stencil printer worldwide with fully integrated 100 percent 3D SPI. Advantages vs. 3D SPI standalone systems include:
• 3D SPI for the inspection of complex PCBs directly after the printing process
• VERSAPRINT stencil inspection detects errors before they appear
• Zero reference measurement of the unprinted PCB can be performed before every print
• Integrated closed-loop function for print offset compensation
• One software platform for print inspection – one consistent operator concept
• Maintenance and service for only one machine
• One contact for both processes
• Less space required on the shop floor

With the Ersa Hotflow 3/20, ten heated zones top-and-bottom and four active cooling zones, Ersa presents a process efficient solution, which is characterized by its high throughput inline operation, low operating cost and very attractive price.

Ersa offers a range of selective solder systems, starting with the Smartflow 2020. Due to its universal pallet fastening, the Smartflow can handle PCB sizes of up to 508 x 508 mm [20” x 20”]. The Smartflow 2020 is smart and compact without compromising quality.

The HR 550 hybrid rework system features a 1,500W high performance hybrid heating element to desolder and solder SMT components up to 70 x 70 mm. A 2,400 W infrared bottom heater in three heating zones guarantees homogeneous bottom-side preheating of the complete assembly. The system addresses all users with the highest requirements in terms of precision and process safety in electronic assembly rework applications.

For more information about Kurtz Ersa North America, visit www.ersa.com

0

Start typing and press Enter to search